• • • • • • Physical installation • Turn the meter off. • Remove any phone cords that are connected to the meter.

• Plug the meter's Ethernet cable into the network plug on the wall. • Attach the USB Ethernet adapter to the other end of the Ethernet cable. • Plug the USB Ethernet adapter into one of the USB ports on the back of the meter.

• Turn the meter on. It will restart automatically. • When the Mail Run screen appears, the LEDs on the Network Adapter should light up or flicker within 15 seconds. This indicates that there is a connection to the network. • Press Menu. • Press Page Down twice. • Select Data Center Options. Google play books for mac download torrent.

$ conda install numpy. $ conda create -n py3k anaconda python=3.

• Press Page Down. • If the Connection Method is not already set to Auto, select the button next to Connection Method to change it to Auto. Network setup The meter can be set to automatically get an IP address from your network's DHCP server (this is the most common setup), or to have a static IP address (required on some networks). To determine the correct settings for your network, contact your IT department or service provider. For networking details, see the. Automatically get an IP address (DHCP) If you want the meter to automatically get an IP address (DHCP): • Press Menu. • Press Page Down twice. • Select Data Center Options.

• Select Network Settings. • Select Get IP. • Select Automatically.

Static IP address If you need to set the meter to a static IP address, contact your IT department to obtain the address, then: • Press Menu. • Press Page Down twice. • Select Data Center Options. • Select Network Settings. • Select Get IP. • Select Specify Address Manually. • Select IP Addr and enter the IP address.

• Select Subnet and enter the subnet mask. • Select Gateway and enter and the gateway. DNS server The meter is already set up with a default DNS server, which usually does not need to be changed. If your network requires the meter to use a custom DNS server, contact your IT department to obtain the server information, then: • Press Menu. • Press Page Down twice. • Select Data Center Options.

• Select Distributor Settings. • Press Page Down. • Select Primary DNS or Secondary DNS. • Select Continue. • Select Edit Options.

• Enter your DNS server address. • Select Accept. • Press Home to return to the home screen. Proxy server If you need to set up a proxy server, see. Related article: •.

RD9700 USB2.0 To Fast Ethernet Adapter: Drivers List 3 drivers are found for ‘RD9700 USB2.0 To Fast Ethernet Adapter’. To download the needed driver, select it from the list below and click at ‘Download’ button.